1GB (2x 512MB) Elpida PC2100R DDR-266 ECC REG Server Memory Kit POST CHECK: 1024 MB OK // 2X REGISTERED ECC MODULES RECOGNIZED
SPEC: PC2100R-25330-M1 // TIMING: CL2.5 (2.5-3-3-0) // ORIGIN: JAPAN
BUS STATUS: 72-BIT PARITY VERIFIED // ZERO MEMORY ALLOCATION FAULTS 1GB (2x 512MB) Elpida PC2100R Server Memory Kit DDR-266MHz • CL2.5 • Registered ECC • 184-Pin RDIMM • Matched Dual Kit /* BANK 0: ARCHITECTURE & GENUINE JAPANESE SILICON */

Up for sale is a verified, matched enterprise pair featuring two (2) genuine Elpida 512MB PC2100 DDR-266 Registered ECC RDIMMs (Part Number: EBD51RC4AAFA-7B, Specification Code: PC2100R-25330-M1, Batch: 0450AXM0448).

Manufactured in Japan, these high-reliability modules are populated with genuine Elpida M2S56D20ATP-75 TSOP-II DRAM ICs. Built specifically for 24/7 enterprise server and workstation workloads, each module incorporates dedicated on-board SSTV16857 registered drivers and a CDCV857A Phase-Lock Loop (PLL) clock buffer. This architecture buffers addressing and control lines against bus capacitance loading, delivering razor-sharp signal propagation, zero clock drift, and rock-solid multi-channel parity synchronization.

/* BANK 1: SPD DUMP & TECHNICAL SPECIFICATIONS */ Manufacturer:Elpida (Japan) Part Number (MPN):EBD51RC4AAFA-7B Spec Code:PC2100R-25330-M1 Batch Identifier:0450AXM0448 (Matched Pair) Total Capacity:1 GB (2x 512 MB) Form Factor:184-Pin DDR1 RDIMM Speed Rating:PC-2100R (DDR-266) CAS Latency:CL2.5 (2.5-3-3-0) Data Integrity:ECC Registered (Buffered) DRAM IC Profile:Elpida M2S56D20ATP-75 Register/PLL:SSTV16857 / CDCV857A Operating Voltage:2.5V Standard DDR /* BANK 2: VERIFICATION PROTOCOL & CONTACT HYGIENE */

Tested and 100% Working: Both modules in this matched pair have completed full hardware diagnostic testing with zero bit-flips, zero parity failures, and zero addressing faults detected.

All 184 gold edge-connector fingers have been visually and physically verified: pristine gold plating, zero scoring, zero corrosion, and zero burn marks. All decoupling capacitors, register solder fillets, and trace routings are completely intact.

/* BANK 3: CHIPSET & ARCHITECTURE COMPATIBILITY DIRECTIVE */

ATTENTION SYSTEM BUILDERS & RESTORERS: This is Registered ECC (RDIMM) memory. It is specifically designed for enterprise servers and workstations with chipsets requiring registered ECC RAM (e.g., Intel Dual Socket 603 / Socket 604 Xeon Prestonia/Gallatin/Foster, ServerWorks Grand Champion, AMD Socket 940 Opteron, HP ProLiant, Dell PowerEdge, and IBM eServer).

Standard desktop boards (Intel 845/865/875, VIA KT-series, NVIDIA nForce2, AMD Socket A/754/939 non-ECC) WILL NOT POST with this memory. Please consult your motherboard manual to verify support for 184-Pin PC2100 Registered DIMMs prior to purchase.

/* BANK 4: LOGISTICAL RESPECT™ DISPATCH PROTOCOL */

Precision semiconductor gates demand rigorous handling and physical security. Your kit will never be tossed into an unshielded envelope. Every order is fulfilled under the strict Logistical Respect dispatch standard:

• Electrostatic Discharge (ESD) Shielding: Modules are secured inside authentic static-dissipative ESD shielding bags to safeguard CMOS transistor gates against stray triboelectric charges.
• Multi-Layer Impact Cushioning: Thoroughly wrapped in heavy-duty multi-layer bubble wrap to absorb shock and protect PCB corners during transit.
• Reinforced Protective Shell: Dispatched inside a tear-resistant, weather-sealed padded bubble mailer for complete environmental security.
• Personalized Enthusiast Letter: Ships with an authentic, personalized gearhead thank-you letter directly from the seller.

STATUS: TOP RATED PLUS FULFILLMENT // SHIPS FAST VIA USPS WITH FREE SHIPPING // PARITY SECURED