FreeNAS HDD Enclosure LFF 3.5 60x 3TB SAS 2x PSU 2x Expanders 180TB Rails CMAThis listing is for one (1) Hard Drive enclosure with 60x 3TB 3.5" SAS 6Gb/s hard drivesConfig as listed (pictures for reference only, may show different components):4U Rackmount chassisBezelDual Power Supplies 120-240V C13 inputsPower cords will be included for free if requested at time of purchaseDual SAS/SAS Quad port Controllers/Expanders (with passthrough (non RAID / IT mode))60x 3.5" 3TB Enterprise SAS 6Gb/s hard drives60x 3.5" Hot swap traysRAW capacity is 180TB, formatted capacity will be less based on type of drive setup chosenSliding rail kitCable management arm2x SAS 6Gb/s Cables with SFF-8088 connectorsOptions:- please inquire if not listed above or below- would be happy to build a custom specPower cord(s) $Free if requested -- see above in specFreeNAS server will be required to have this Enclosure connected to, please contact us if this is neededSATA or SAS drives can be used - please contact us for a quote if different capacity is desiredAdditional SAS cables are available for multi path connections to drives - with this config (2 cables) will have a single connection to each expander/controller in chassisRack cabinets are available, we can set up with servers and networking and ship ready to deploy solution already installed in the rackAdditional info:No OS installed -- see above, need serverIf any of the options are listed as "if requested" please do send a message requesting themShipping will be via a carrier of our choice unless prior arrangements are madeInternational shipping:Some locations are more expensive to ship to than othersCannot be shipped via USPS, too heavy and too large for USPSAny and all customs fees, brokerage charges, taxes etc are the responsibility of the buyerPlease contact us with any questionsThank you

This listing is for the hardware kit designed to run Veeam Linux Hardened Repository Backup Solution

OS is not installed, please contact us if this is desired

We can install any OS and preconfigure prior to shipping out

This kit ships in 3 crates via LTL freight

1x crate with 42U APC AR3300 Rack

2x crates with hard drives

We can supply larger capacity, can be Rack:

APC AR3300 42U with doors and sides

2x APC 8971 PDU L6-30P input plug

Server:

HPE DL385 Gen10 Plus 8x SFF Server

8x Boot drives in RAID60

2x AMD EPYC 7513 32 Core 2.6GHz

4096GB (4TB) DDR4 ECC RAM

2x PSU

Dual port OCP3 NIC 2x 100GbE QSFP56 -- additional adapters can be added for redundancy

MR416i-a RAID Adapter onboard for boot drives

Quad Port external RAID Adapter for HDD enclosures 12Gb/s

SAS Cables

Rail Kit

Components can be added or removed, please inquire

HDD Enclosures (Quantity 10, each is 4U):

60 Bay LFF 3.5" HDD Enclosure

Dual PSU

Dual SAS Controllers/Expanders

60x 18TB Enterprise SAS HDD - drives are new

RAW capacity is 10,800TB (10.8PB), formatted capacity will be less based on type of drive setup chosen

Rail kit

Cable management arm

Photos may have optional components that may or may not be included

Options:

- please inquire if not listed above or below

- would be happy to build a custom spec

Additional capacity can be added, please inquire

Rack cabinets are available, we can set up a larger solution with multiple servers and networking and ship ready to deploy already installed in the rack

Additional info:

No OS installed -- see above

If any of the options are listed as "if requested" please do send a message requesting them

Shipping will be via a carrier of our choice unless prior arrangements are made

This is custom solution, built to order, will have some lead time

Please inquire if short LT is required

International shipping:

Some locations are more expensive to ship to than others

Cannot be shipped via USPS, too heavy and too large for USPS

Any and all customs fees, brokerage charges, taxes etc are the responsibility of the buyer

Please contact us with any questions

Thank you