Premium Plus Instant Peel DTF Film - 23.6" x 328' | PRINTIUM PRINTIUM ✦ Instant Peel · High-Speed Production Premium Plus DTF Film
23.6" × 328' (60 cm × 100 m)
The fastest instant peel film in the Printium lineup. Upgraded release layer with advanced 4-layer coating — zero wait time, zero residue, built for maximum throughput.
328ft (100 m) · Roll Length 23.6" Width (60 cm) 3–5s Press Time 100% 5-Star Reviews PET Film Material 4-Layer Coating Surface 3–5 sec Press Time Instant Peel Release Type All Fabrics Compatible Why Choose This Film Speed Meets Precision
01 Upgraded Release Layer
Advanced 4-layer release system peels instantly right off the press — no cooling period, no warm peel wait. The fastest peel in the lineup, designed for high-speed production environments.
02 4-Layer Coating System
Anti-static, anti-slip, ink-absorption, and instant peel coatings work together. Each layer serves a specific function — from preventing static build-up in automated lines to ensuring complete ink bonding and clean release.
03 Faster Cycle Time
Only 3–5 seconds of press time needed, even at lower pressures — significantly faster than standard instant peel films. Run more transfers per hour without sacrificing bond strength or print quality.
04 Vibrant Color Output
Ink-absorption layer locks pigments in place before curing. Delivers vivid, saturated colors with clean contrast — whether printing photorealistic designs or bold single-color graphics.
05 Anti-Static Performance
Anti-static coating prevents film from attracting dust particles and clinging during automated shaker runs. Cleaner film handling, fewer rejected transfers, and smoother workflow in high-speed production lines.
06 Universal Compatibility
Works with all water-based DTF inks and adhesive powders. Compatible with cotton, polyester, nylon, canvas, leather, and blended fabrics — light and dark colors alike.
Technical Details Full Specifications SpecificationDetail Product NamePremium Plus Instant Peel DTF Film BrandPRINTIUM Roll Size23.6" × 328 ft (60 cm × 100 m) MaterialPET (Polyethylene Terephthalate) Film Surface FinishDouble Matte — 4-Layer Coating (Anti-Static, Anti-Slip, Ink-Absorption, Instant Peel) Release TypeInstant Peel — no cooling required Press Time3–5 sec (at recommended pressure) Press Temperature280°–320°F (138°–160°C) Press PressureMedium (25–40 psi) Ink CompatibilityAll water-based DTF inks Powder CompatibilityAll DTF adhesive powders (fine, medium) Fabric CompatibilityCotton, Polyester, Nylon, Canvas, Leather, Blends Suitable ForLight and dark-colored garments Anti-StaticYes — dedicated anti-static coating layer ConditionNew SKUPR-DFIL-007F Instructions How to Use
- 1 Load the Film
Load the roll into your DTF printer with the coated (matte) side facing the printheads. Ensure the film feeds straight and tension is properly set to prevent misalignment.
- 2 Print Your Design
Print using your DTF RIP software with the correct color profiles. The ink-absorption coating accepts pigment precisely — no bleeding, no feathering on fine details.
- 3 Apply Adhesive Powder
While ink is still wet, apply DTF adhesive powder evenly. Shake off excess. The film surface ensures clean separation — powder sticks only where ink was deposited.
- 4 Cure the Transfer
Pass the film through your DTF dryer or curing oven at 230°–280°F until powder is fully melted and the surface appears glossy and transparent.
- 5 Heat Press onto Garment
Position the cured film on the garment, printed side down. Press at 280°–320°F for 3–5 sec at medium pressure (25–40 psi).
- 6 Peel Instantly
Lift the film immediately after pressing — no cooling needed. The instant peel coating releases cleanly with zero residue left on the garment or the design surface.
Questions & Answers Frequently Asked Questions What makes Premium Plus faster than standard Premium film? Premium Plus features an upgraded release layer with a 4-layer coating system — anti-static, anti-slip, ink-absorption, and an advanced instant peel coating. This combination requires only 3–5 seconds of press time even at lower pressures, making it significantly faster than the standard Premium film (5–8 seconds). It is the top choice for high-throughput shops. Does instant peel film work on all fabric types? Yes. This film is compatible with cotton, polyester, nylon, canvas, leather, and blended fabrics — both light and dark colors. The release layer performs consistently across all heat-pressable materials when used within the recommended temperature and pressure range. What are the recommended press settings? Press at 280°–320°F (138°–160°C) with medium pressure (25–40 psi) for 3–5 sec. Always test on a sample garment when switching fabric types or printer setups. Exact settings may vary slightly based on your heat press model and fabric thickness. Is this film compatible with my existing DTF inks and powders? Yes. The film is engineered to work with all water-based DTF inks and all standard adhesive powders, including fine (80–180 micron) and medium (180–300 micron) grades. No special inks or powders are required — it integrates seamlessly into your existing DTF workflow. How should I store unused film rolls? Store rolls upright or lying flat in their original packaging in a cool, dry location away from direct sunlight, heat sources, and humidity. Avoid storing near solvents or chemicals. Always reseal the packaging after partial use to prevent dust contamination and surface degradation. What is the difference between Premium Plus and Premium film? Premium Plus features an upgraded 4-layer coating with a more advanced release system, requiring only 3–5 seconds of press time versus 5–8 seconds for the standard Premium film. If throughput and cycle speed are priorities — especially in high-volume automated environments — Premium Plus delivers a measurable productivity advantage. Order with Confidence
Professional-grade DTF film — same day shipping available on qualifying orders.
✓ Genuine Brand 3–5 sec Press Time 100% 5-Star Reviews 328 ft Per Roll DTFBANK × PRINTIUM
