Selling a pack of 2 HitronHT-EM4 MoCA 2.5 Network Adapter working perfectly and updated to the latest firmware.
Can be used as a matched pair to provide ethernet via a previous installed coaxial cable to a room in your home that a UTP cable couldn't be installed ( as was my case in my condo)
Another option is to upgrade all your home CATV to be MoCA capable but you need to be aware that you have to use MoCA rated splitters ( to 1650 Mhz ) only, and you must add a MoCA filter between your provider coaxial cable and your modem cable input ( which will block your neighbors to access your own network). This improvement will let you to add additional MoCA 2.5 Network adapters to any room that have a CATV wall connector allowing to have also a 1GB ethernet port available on this roomAs others sellers noted: MoCA adapters are not compatible with cable installations already in use for Satellite, Dish, DirecTV or AT&T U-Verse !!!
No returns or refunds accepted at allEthernet Port: 1x RJ-45 10/100/1000 Mbps (Gigabit Ethernet) portCoaxial Connectors: 2x RF F-Type 75-Ohm female portsProtocol Standard: MoCA 2.5Backward Compatibility: Fully compatible /w MoCA Bonded 2.0, MoCA 2.0, MoCA 1.1, and MoCA 1.0 hardwareMax MoCA-to-MoCA Throughput: Up to 2.5 Gbps across a maximum of 5 channelsMax MoCA-to-Ethernet Speeds: Up to 1 Gbps full duplexPer-Channel Bandwidth: 500+ Mbps per MoCA channelMaximum Network Nodes: Supports up to 16 connected MoCA devices on a single coaxial home networkFrequency Band Range: 1125 MHz to 1675 MHzBeacon Band: D1–D10Channel Bandwidth: 100 MHz in baseline modeModulation Types: BPSK, QPSK, 8QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, and 1024QAMLink Privacy & Encryption: 56-bit DES and 128-bit AES hardware encryption for password protection and secure data transferDevice Management: Upgradable software via a local web-based graphical user interface (GUI)Status Indicators: Power, MoCA status, and LAN (Ethernet) connectivityPhysical Dimensions: 4.3" x 2.7" x 1.0