UBB Store

SFR1M44-U100 3.5 Inch 1.44MB USB SSD Floppy Drive Emulator Grey For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SFR1M44-U100 3.5 Inch 1.44MB USB SSD Floppy Drive Emulator Grey

Price: US $49.99

Product Features

Hard DiskInterface USB 1.1

SpecialFeature Plug and Play

Hard DiskForm Factor 3.5 inches

Hard Disk Description Solid State Drive

CompatibleDevices PC

InstallationType Internal Hard Drive

Color Grey

Hard DiskSize 1.44 MB

About this Item

3.5 Inch USB Floopy Disk Drive uses normal USB flash drive as the medium for transfer design. ·1.44MB SFR1M44-U100 USB Emulator equipped with 34pin floppy driver interface, 5V DC power supply, easy to install.
【USB Emulator Capacity】--1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data transfer rate: 500 kbps Encoding method: MFM. ·1000pcs partitions in usb flash drive can be used. This floppy drive simulator is perfect for embroidery machine and industrial control equipment of 1.44MB floppy disk drive
【Attention in Installation】 -- Do not be reverse when installing the cable; The USB drive must be formatted into 1.44M FAT12 format , then it could be identified by our emulator.
【IMPORTANT TIPS】-- The default loaded firmware is from the manufacturer, support 1.44M, 34pin - IBM/PC interface, the format is DOS/FAT12, and the chip is AT32F415 Cortex-M4, so please make sure your machine could support these important points.
If you would like to use our floopy emulator on AMIGA, you need to change our default firmware to FlashFloppy firmware first.

SystemFloppy to USB Emulator

IMPORTANTTIPS

The defaultloaded firmware is from the manufacturer, support 1.44M, 34pin - IBM/PC interface,the format is DOS/FAT12, and the chip is AT32F415 Cortex-M4.

Please makesure your machine could support these important points.

Attention inInstallation

Do not bereverse when installing the cable;

The USBdrive must be formatted into 1.44M FAT12 format , then it could be identifiedby our emulator.

If you wouldlike to use our floopy emulator on AMIGA, please change our defaultfirmware to FlashFloppy firmware first.

Features:

* 32-bit CPUdesigned, high integration, and reliable performance.

* Connectedto the device via the floppy drive interface, simple to install and use.

* Useordinary USB flash drive for data storage, instead of the floppy disk.

* Suitablefor all kinds of textiles, electronics, machinery which use floppy disk anddriver.

systemFloppy to USB emulator

Model:SFR1M44-U100 code*: U00

Machines usenormal 1.44MB floppy disk an driver, example : STOLL flat knitting machine,MULLER3 BONAS STAUBLI JC4 JC5 label weaving machine, YAMAHA KORG etc musicinstruments which use normal 1.44MB floppy disk and driver.

Floppydriver with below function needed:

Floppydriver with 34pin interface, and 5V DC power plug

Use 2HDflpppy disk with 1.44MB capacity

Format ofdisk : Cylinders: 80 Tracks: 160 Sectors/Track: 18

Bytes/Sector:512 Data transfer rate: 500 kbps

Encodingmethod: MFM.

Features:

1.34pinfloppy driver interface, 5V DC power supply, easy to install.

2.Useordinery usb flash drive as the medium for transfer design.

3.1000pcspartitions in usb flash drive can be used.

4.Built-inself-format function. (read relevant documents to use this function)

Panel: