Yottamaster 5-Bay Hardware RAID Hard Drive Enclosure — USB 3.0 Aluminum
Tested working and complete, with the power adapter and USB cable included. A solid aluminum five-bay enclosure with a real hardware RAID controller on board — RAID is set with the rear DIP switches, so your computer just sees the finished array with no software or drivers involved.
WHAT MAKES THIS ONE GOOD
- Hardware RAID controller: RAID 0, RAID 1/10, RAID 3, RAID 5, Combine (JBOD span), plus Clear-RAID
- Mode chart is printed right on the back panel, set by DIP switches and the recessed SET button
- Five tool-free trays — drives slide in and seat, no screws needed
- Takes both 3.5" and 2.5" SATA drives
- Solid aluminum chassis with a rear cooling fan and full-height ventilation
- USB 3.0 plug and play — the array mounts as a single volume, no drivers to install
- External DC power adapter included, so all five drives spin up Yottamaster
- Model: not printed or engraved anywhere on the unit — sold exactly as pictured
- Bays: 5 x SATA, 3.5" or 2.5"
- RAID modes: 0 / 1 / 10 / 3 / 5 / Combine / Clear-RAID via rear DIP switches
- Interface: USB 3.0 (Type-B port on the enclosure)
- Power: external DC power adapter (included)
- Enclosure material: aluminum, silver
WHAT YOU RECEIVE
One enclosure with all five drive trays, the DC power adapter and the USB 3.0 cable. Hard drives are NOT included.
Multiple units available. The photos are representative — each unit is the same model and each was tested the same way. You will receive one complete unit per quantity ordered.
SHIPPING
Carefully packed and shipped via USPS Ground Advantage.
GOOD TO KNOW
Changing RAID mode rebuilds the array and erases whatever is on the drives, which is why the back panel carries a back-up-first warning. Set the mode you want before you load real data. Drives from an existing array built in another enclosure will not carry over.
NOTES ON CONDITION
Used and tested working, pulled from a working environment. The aluminum shows light handling marks consistent with normal use — please see the photos. A small removable inventory sticker is on the front and peels off cleanly. No model number appears anywhere on the unit, so it is sold as pictured.
No returns — please review the photos carefully before purchase.
