CheIsio MSIP-REM-CC2-T540-CR 10GB SFP+ PCIe X8 Quad Port Network Adapter Tested

High Performance, Quad Port 10 GbE Unified Wire AdapterEnables TCP, UDP, ISCSI, iWARP, and FCoE Offload over Single Unified Wire with SR-IOV, EVB/VNTag, DCB
OverviewChelsio’s T540-CR is a quad port 10 Gigabit Ethernet Unified Wire adapter with a PCI Express 3.0 host bus interface, optimized for cloud computing, HPC virtualization, storage, and other data center applications. Since the Host Bus Interface is PCI Express 3.0, this card can support all 4 10G ports running at line-rate.The fifth-generation (T5) technology from Chelsio provides the highest 10GbE performance in the industry and dramatically lowers host-system CPU communications overhead with on-board hardware that offloads TCP/IP, iSCSI, FCoE and iWARP RDMA processing from the host system and frees up host CPU cycles for other applications. As a result, the system benefits from higher bandwidth, lower latency, and reduced power consumption.
The Unified Wire SolutionThe T540-CR enables a unified wire for LAN, SAN, and cluster traffic, made possible by the high bandwidth and low latency characteristics, combined with storage and cluster protocols operating over Ethernet (iSCSI, FCoE, and iWARP). T5 based adapters such as the T540-CR support both file and block based storage protocols and are ideal for building high performance SAN and NAS solutions. With both iSCSI and FCoE offload, FC applications can run natively over Ethernet, while taking advantage of its performance benefits and economies of scale. T5 also offers an ultra-low latency RDMA over Ethernet (iWARP) interface, making the T540-CR a competitive drop-in replacement for InfiniBand in high performance computing applications. It is supported in the same standard software distributions and allows running IB applications unmodified.T540-CR integrates a full-fledged hardware Traffic manager for robust flow control, traffic management, and predictable QoS.
The adapter’s four ports and IEEE 802.3ad link aggregation, and port-to-port and adapter-to-adapter failover features are ideal for critical network applications that require redundancy and high-availability capabilities.
T540-CR Ethernet-only unified networking reduces the data center’s cost in adapters, cables, switches, rack space, power, equipment spares, management tools, planning, installation and operation.T5 – Fifth-Generation Protocol Offload EngineThe T5 is Chelsio’s fifth-generation TCP offload (TOE), fourth-generation iSCSI, and third-generation iWARP (RDMA) design. T5 builds upon the T4 feature set and improves performance across the board. On the host bus side, the T5 exposes a PCI Express v3.0 x8 host bus interface, with up to 64 Gbps raw bandwidth to the server. T5 also provides support for PCIe I/O virtualization and integrated VM-to-VM switching.
Complete and Flexible TCP OffloadThe T5 has hundreds of programmable registers for protocol configurations, RFCs, and offload control. The T540-CR can offload processing per connection, per-server, or per-interface, and simultaneously tunnel traffic from non-offloaded connections to the host processor for the native TCP/IP stack to process. The T540-CR provides a flexible zero-copy capability for regular TCP connections, requiring no changes to the applications, and delivers line rate performance at minimal CPU utilization and memory subsystem utilization.
Packet Switching and RoutingT540-CR integrates a high performance packet switch, which allows switching traffic from any of the input ports to any of the output ports (wire-to-wire) and from any of the output ports to any of the input ports (host-to-host), with header rewrite and NAT offload.
Robust, Proven SolutionSubjected to compatibility and stress testing over multiple years by several OEM test suites, and production deployment in servers, storage systems, and cluster computing, Chelsio’s robust, stable protocol offload technology delivers proven performance in a wide range of environments. The T540-CR is generations ahead of competing products in robustness and implementation maturity.
Software/DriversChelsio offers a full suite of protocol software drivers with the T540-CR adapters. See Support Page for the latest information. The software supports operation in both protocol-offload and non-offload modes.
Ordering InformationModel: T540-CRPhysical Interface: 10BASE-SR or LR*Connector: LC DuplexMedia: MMF or SMF.*SFP+ optics sold separately. Only Chelsio-supplied modules may be used.
GENERAL- It is recommended to communicate with customer service before placing an order. We will usually respond to your inquiry within 3 hours.
- We guarantee that this item will arrive exactly as described in this listing.If it's a usedproduct, there may be slight differences in details, mainly reflected in the year and place of production.
- Buyer will be subject up to 50% of the item price if the returned item is damaged or missing parts.
- We reserve the right to repair or replace the same item or refund the purchase efesales at our discretion.
- At our option, we substitute/refund damaged or lost product at the time the insurance claim is paid.
- All Items must be returned with all original contents and components with prior authorization.
-In case of damaged parcel:
* If you notice any damage to the box or the shipment, please don't accept the parcel.
* To report a damage parcel, please contact us.
* We will follow up and file a damage claim with the carrier.
* All shipping, packaging materials and boxes must be saved.PAYMENTS- Payments managed by .
-Require immediate payment when buyer uses Buy It Now.
- We accept E-Check through PayPal, Will ship after checks clears.
- Checkout is expected within 3 days of sale close and payment within 4 days.
- Unpaid sale wins will be forfeited after 4 days.SHIPPING
-Normally your items will be sent out within 1-5 business days after the payment cleared.
- We ship package to your registered address only.
- Items will be shipped from China.
- Delivery time depends on destination and other factors. If you don't get your package on time, please contact us first, we will help you to resolve it.RETURN & REFUND
- We will accept returns for items that were posted with incorrect information and/or wrong item shipped.
- Buyer is responsible for any return shipping costs with insurance unless it is a warranty issue.
- RMA is required for all returns; please email us with any problems.
- Any item returned for warranty must be returned in the same condition that it was received.response
- Your positive response means a lot to us. We will leave you a positive response automatically after we got your positive responses.
- Any complaint, please contact us via message first. Please give us a chance to make things right before leaving any neutral or negative responses. We appreciate your understanding.
-If you have any problems, please contact us so we can solve them together. We want you to have a good experience with us!CUBETECH