This is a Dell-branded Toshiba PX02SMF040 enterprise solid-state drive, Dell Part Number 09YPHT. It provides 400GB of capacity, enterprise-grade eMLC NAND and dual-port 12Gb/s SAS-3 connectivity.

Four identical drives are available. Select the desired quantity when purchasing. Each purchased quantity of one includes one drive, not all four drives.

All four available drives have identical, extremely light recorded usage. Each reports 0% endurance consumed, SMART Health Status: OK, and zero corrected or uncorrected errors. These are high-endurance enterprise SSDs designed for sustained server and storage workloads.

The dual-port SAS interface supports multipath redundancy when installed in a compatible enterprise storage platform or hot-swap server backplane.

Suitable Applications

• Database and transactional workloads

• Logging, monitoring and analytics

• File and application servers

• Enterprise storage arrays

• Test, development and home-lab SAS servers

SMART Condition — Each Available Drive

• SMART Health Status: OK

• Endurance consumed: 0%

• Power-on time: approximately 531 hours, 30 minutes

• Total data read: approximately 400.756GB

• Total data written: approximately 69.865GB

• Total data verified: approximately 1.144GB

• Corrected errors: 0

• Uncorrected errors: 0

The recorded writes represent less than one-fifth of a single full-drive write. The drives have no measurable endurance consumption and remain in excellent health.

Key Specifications

• Listing quantity: One drive per purchased unit

• Available inventory: Four identical drives

• Brand: Dell

• OEM manufacturer: Toshiba

• Model: PX02SMF040

• Dell Part Number: 09YPHT

• Capacity: 400GB per drive

• Interface: 12Gb/s SAS-3, dual-port

• Backward compatibility: SAS-2 6Gb/s

• Form factor: 2.5-inch SFF, 7 mm

• Drive type: Enterprise Solid-State Drive

• NAND technology: Enterprise MLC

• Endurance class: endurance: Up to 10 drive writes per day

• Hot-swap support: Yes, with a compatible SAS backplane

• Power-loss protection: Yes

• Error correction: Toshiba QSBC

• Country of manufacture: with appropriately equipped:

  • Dell PowerEdge servers

  • HPE and Supermicro servers

  • Enterprise storage systems

  • Other platforms using SAS controllers and SAS backplanes

  • SAS-3 12Gb/s and SAS-2 6Gb/s depends on the server, storage controller, backplane, firmware and drive-qualification requirements.

    Not Compatible With

    • SATA-only controllers or backplanes

    • Standard laptop or desktop SATA connections

    • NVMe or M.2 slots

    • Ordinary SATA-to-USB adapters

    • USB enclosures without a SAS controller

    This is a server-class SAS drive, not a consumer SATA or NVMe SSD. A compatible SAS controller or SAS backplane is required.

    Physical Condition

    • Extremely lightly used enterprise SSD

    • 0% endurance consumed

    • No SMART errors

    • No visible damage

    • Clean connectors

    • Casing in excellent condition

    • Original factory label intact and legible

    • No original retail packaging or manufacturer warranty

    What Is Included

    • One Dell/Toshiba 400GB SAS SSD

    • Anti-static protective packaging

    No caddy, tray, screws, cables or adapters are included.

    Photos may show one representative drive from the four identical drives available. All drives have the same model, Dell part number, capacity, condition and SMART usage. Serial numbers vary.

    Shipping and Returns

    The drive will be securely packaged in anti-static protection and shipped promptly within two business days.

    Returns are accepted within 14 days for items that are defective or materially not as described, subject to applicable policy. Compatibility with the buyer’s server, controller, backplane, firmware and intended configuration is the buyer’s responsibility.

    Please verify SAS controller, backplane and firmware compatibility before purchasing.

    Returned drives must be received in the same condition in which they were shipped, including:

    • All original labels and identifiers intact

    • No physical damage or modification

    • No missing components

    • No evidence of improper installation or handling