80MM Case Fans for Cooling Electronics and Mechanical Components

This is a 80mm dc cooling fan having a thickness of 25mm. 80mm cooling fans are being used for small PC cases like small Mini ITX, Mini STX, or Mini ATX cases, as well as SSF, HTPC and other chassis (intake & exhaust). or as a replacement fan for noisy or broken 24 volt fans in amplifiers, UPS battery backup units, LED stage lights, solar battery box, CO2 incubator, variable speed drive, pmp 2000 pa mixer, 3D printer controller box, other audio / video and electronic equipment, etc.

This is a premium quality 24 volt 80mm Brushless Fan that comes with Hydraulic Bearing that offers high performance, longer lifespan [40,000 hours], and silent operation. The fan's Blade / Housing is constructed of Plastic Material UL 94V-0 P.B.T. which have a high resistance to flammability. Impedance protected motors contains pure copper coil that have a higher resistance to heat during a rotor lock. It is a 2-pin connector fan with 11.8 inches enough long power cable.

The fan generates an airflow of 43.6 CFM and high static pressure of 0.31 mmH2O. The fan can be used as both intake or exhaust fan inside your desktop or server chassis. It is Not exactly "silent" but quiet enough that you can't hear it during use. and has a maximum noise rating of 31 dBA.

Besides a 80x80x25mm fan, it comes with nuts/bolts long enough to mount for your use, also includes a 80mm metal fan guards are used to provide a physical barrier around spinning fan blades to prevent accidental contact with fingers or other objects.

So, if you looking for a quiet and pushes a decent amount of air 24v 80mm fan for your home theater or electronic projects, or for other devices then you won’t find anything better than this. Widely Used: Ideal for small PC cases (HTPC, ITX, Mini ATX, SSF); also as a perfect replacement fan for noisy or broken 24 volt fans in amplifiers, UPS, LED stage lights, CO2 incubator, solar battery box, 3D printer controller box, other audio / video and electronic equipment, etc.
Long-lasting Motor: This is a Brushless Fan that comes with Hydraulic Bearing runs up to 40,000hrs; The fan can be used as Both Intake or Exhaust fan to pushes a decent amount of air for your electronics and mechanical components
Easy to Install: It is a 2 pin fan with 11.8 inches enough long power cable; Red wire: Positive Black wire: Negative; You can easily exchange the wires if their position is different from your old fan
Fan Specs: 80 x 80 x 25 mm ( 3.15 x 3.15 x 0.98 in. ) | Rated Voltage: 24VDC | Rated Current: 0.1A | Power: 2.1W | Speed: 2800 RPM | Noise: 31 dBA | Airflow: 43.6 CFM | Static Pressure: 0.31 In H2O
What You Get: Includes 1pcs 80x80x25mm fan; 4pcs long enough mounting screws nuts; 1pcs 80mm metal fan grill to protect your fingers and fan blades