Intel D7-P5510 7.68TB NVMe SSD ListingIntel D7-P5510 7.68TB TLC Enterprise NVMe PCIe Gen4 x4 SSD QTY: 1 Genuine Intel D7-P5510 7.68TB enterprise-grade NVMe solid-state drive.Item Condition & Testing
- Condition: The drive is in used condition and shows cosmetic marks from handling, installation, testing, or removal. These markings are strictly visual and do not impact the drive's performance or functionality.
- Testing: The drive has been fully tested and verified for proper operation prior to shipment.
- Data Security: The drive will be securely erased before being packaged and shipped.
- Health Reports: Full SMART / NVMe health information and disk reports can be provided upon request. Photos are of the actual item.
Technical Specifications Brand Intel Series D7-P5510 Capacity 7.68TB (7,680 GB) Form Factor 2.5-inch, 15mm z-height Interface U.2 (PCIe Gen4 x4) / NVMe Drive Type Enterprise / Data Center SSD NAND Type Intel 144-Layer TLC 3D NAND Endurance Rating 1 DWPD (Drive Writes Per Day) Sequential Read Up to ~7,000 MB/s Sequential Write Up to ~4,190 MB/s ⚠️ Important Compatibility Information
This is an enterprise-grade PCIe NVMe drive utilizing a 2.5-inch U.2 physical interface.
- NOT a standard SATA drive.
- NOT a SAS drive.
- NOT an M.2 NVMe drive.
A standard 2.5-inch SATA or SAS backplane drive bay will not operate or recognize this drive just because the physical size looks similar. Your server backplane, motherboard, PCIe adapter card, or storage controllers must explicitly support native U.2 NVMe PCIe connectivity.
The buyer is solely responsible for verifying compatibility before purchasing. Please check your system configuration, server model, backplane capabilities, firmware, and cabling requirements. A drive not being recognized due to unsupported or misconfigured host hardware does not indicate a defective unit.
Serial Number Tracking & Return Policy
- Documentation: Serial numbers, model numbers, manufacturer labels, physical condition, and SMART health metrics are fully recorded and photographed before shipment.
- Return Requirements: Any accepted return must be the exact same physical drive that was originally shipped. All manufacturer labels, security seals, and serial numbers must remain intact and unaltered.
- Dispute Handling: Fraudulent returns involving substituted hardware, altered serials, or post-delivery physical damage will be documented and reported directly to Claims.
- Inclusions: This listing is for the bare drive only. No drive caddies, trays, caddy screws, interface cables, or adapters are included unless specifically pictured.
