MGE Pulsar MX 5000 RT 5 kVA 4.5 kW Online Double-Conversion Rack-Mountable UPS

Protect critical servers, networking equipment, and other sensitive electronics with the MGE Pulsar MX 5000 RT online uninterruptible power supply. Rated at 5,000 VA / 4,500 W, this enterprise-class UPS uses VFI-SS-113 online double-conversion technology with power factor correction to provide clean, regulated power and reliable protection against electrical disturbances. The unit can be installed as a rack-mounted UPS or configured as a tower system.

Features

• 5 kVA / 4.5 kW power capacity
• Online double-conversion UPS technology
• VFI-SS-113 topology for continuous power conditioning
• Power factor correction for improved efficiency and load handling
• Static bypass switch for continued power delivery during appropriate bypass conditions
• Rack-mountable 3U design
• Can also be configured as a tower unit
• Supports multiple output voltage configurations
• 50/60 Hz frequency operation supported
• Built-in communication and monitoring capabilities
• Compatible with extended battery modules for longer runtime
• Designed for servers, networking equipment, telecommunications, and other critical loads
• Enterprise-grade design suitable for IT and facility applications

Specifications

• Brand: MGE
• Series: Pulsar MX
• Model: MX 5000 RT
• Product Type: Online Uninterruptible Power Supply
• UPS Topology: Online Double Conversion
• VFI Classification: VFI-SS-113
• Rated Capacity: 5,000 VA / 4,500 W
• Input Phase: Single Phase
• Nominal Input Voltage: 200 / 208 / 220 / 230 / 240 / 250 V
• Input Voltage Range: 120–280 V
• Input Frequency: 40–70 Hz
• Frequency: 50/60 Hz Auto-Select
• Power Factor: Greater than 0.99
• Output Voltage: 200 / 208 / 220 / 230 / 240 / 250 V
• Output Frequency: 50/60 Hz ±0.5%
• Output Harmonic Distortion: Less than 3% in the original MX 5000 RT specification
• Overload Capacity: 105% continuous; 110% for 2 minutes; 125% for 1 minute; greater than 150% for 0.5 second
• Cooling: Convection cooled static bypass design
• Battery Type: Sealed lead-acid, maintenance-free
• Standard Battery Configuration: 15 × 12 V, 5 Ah battery modules
• Operating Temperature: 0°C to 40°C
• Relative Humidity: 20%–90%, non-condensing
• Storage Temperature: -25°C to 40°C
• Maximum Altitude: 1,000 m
• Noise Level: Less than 45 dBA
• Rack Height: 3U
• Rack Width: 19-inch class
• Rack Depth Compatibility: 800–1000 mm rack depth
• Communications: USB and serial communication, remote power-off, output contacts, and EXB battery detection
• Extended Battery Support: Yes

The manufacturer documentation specifies 5 kVA / 4.5 kW capacity and online double-conversion operation. The published product literature also lists a standard rack configuration of approximately 3U and compatibility with 800–1000 mm deep racks.

Backup Runtime

The standard 5 kVA Pulsar MX RT configuration provides approximately 8 minutes of standard backup time, depending on load and operating conditions. Optional EXB battery modules can substantially extend runtime; published specifications list approximately 35 minutes with one EXB, 60 minutes with two EXB units, and 95 minutes with three EXB units under the specified conditions.

Rack-Mount Installation

• Rack-mountable 3U chassis
• Front mounting brackets are adjustable
• Rear bracket system is available for rack installation
• Manufacturer documentation recommends removing the battery tray to make rack integration easier because of the UPS weight
• Rack rails and mounting hardware may be supplied depending on the specific configuration

Package Includes

• 1 × MGE Pulsar MX 5000 RT 5 kVA / 4.5 kW UPS

Please note: Battery condition, rack rails, power cables, communication cards, and external battery modules should be verified separately based on the exact unit being sold.