MiTAC PH12SI-Q170-12V Industrial Thin Mini-ITX Motherboard
For sale is a genuine MiTAC PH12SI-Q170-12V Thin Mini-ITX industrial motherboard. This is the Intel Q170 chipset version with a 12V DC power input.
Please match the complete PH12SI-Q170-12V part number before purchasing. MiTAC manufactured multiple PH12SI configurations, including different chipsets and 12V or 19V power versions. This listing is specifically for the Q170 12V model shown in the photographs.
Identification
Brand: MiTAC
Model: PH12SI
Manufacturer Part Number: PH12SI-Q170-12V
Additional Factory Markings: PH12SIZM4G00H, PH12SIF-610
Chipset: Intel Q170
Socket: Intel LGA1151 / Socket H4
Power Version: 12V DC
Technical Specifications
- Supports compatible 6th and 7th Generation Intel Core i7, Core i5, Core i3, Pentium and Celeron LGA1151 processors
- Maximum supported processor TDP: 65W
- Intel Q170 chipset with Intel vPro capability
- Two 260-pin DDR4 SO-DIMM memory sockets
- Supports up to 32GB non-ECC DDR4 memory
- Four SATA III 6Gb/s connectors
- Intel Q170 SATA RAID support
- One PCI Express 3.0 x4 expansion slot
- One full-size Mini PCIe slot with mSATA support
- One half-size Mini PCIe slot
- Dual Intel Gigabit Ethernet ports
- Intel I219-LM and Intel I210-AT network controllers
- Four rear USB 3.0 ports
- Internal USB 2.0 headers
- HDMI 1.4 video output
- DisplayPort 1.2 video output
- Internal LVDS/eDP display connectivity
- Four internal RS-232 serial headers
- Programmable MiAPI/GPIO header
- Realtek ALC662 audio
- Rear microphone and line-out connections
- 12V DC barrel power input
- Alternate onboard 4-pin 12V power input
- Thin Mini-ITX form factor
- Dimensions: 170mm × 170mm / 6.7 × 6.7 inches
Condition
Pre-owned system pull in excellent physical condition. The motherboard is clean and shows no obvious physical damage. Please examine all photographs carefully, as they are part of the item description.
Included
- One MiTAC PH12SI-Q170-12V motherboard
Not Included
- Processor
- Memory
- CPU cooler or heatsink
- Storage drive
- Power adapter
- SATA cables
- I/O shield
- Operating system
- Additional accessories
Important Compatibility Information
This is the 12V version of the PH12SI motherboard. It should only be used with an appropriate regulated 12V power source. Do not substitute a 19V adapter. Processor support can also depend on the installed BIOS revision, particularly when installing a 7th Generation Intel processor. Buyers should confirm compatibility with their processor, enclosure, power supply and application before ordering.
