1x 802.3BT(POE++) POE IN
4x 802.3AT(POE+) POE OUT
5 PortGigabitPoE Passthrough Switch
PoE Extender Cascade Repeater
outdoor rainproof

NOTE:
The PoE extender/switch does not require local power and is powered via the Uplink port PoE input.
Additionally, it supports DC power input: DC 12V-57V, 5.5x2.1mm DC port*
Supports PoE++ (802.3bt) power input, with a maximum of 90 watts input, and a total power output of 72 watts for LAN1-LAN4 PoE.
Supports PoE+ (802.3at) output on LAN1-LAN4.
LAN1-LAN4 Ext mode: Maximum network cable length up to 250 meters, Ethernet speed: 10 Mbps**
LAN1-LAN4 LAN mode: Maximum network cable length up to 100 meters, Ethernet speed: 1000 Mbps
Automatically detects and protects PoE equipment from damage.Supports IEEE 802.3af/802.3at/802.3bt (maximum 90 watts) Power over Ethernet (PoE) switch
Supports DC 48V-57V passive Power over Ethernet PoE switch
Supports DC 48V-57V passive Power over Ethernet PoE injectorThe PoE extender/switch has 5 10/100/1000 Mbps PoE ports, with the Uplink port for PoE input (compliant with IEEE 802.3bt/802.3at/802.3af) and LAN1-LAN4 ports for PoE output (compliant with IEEE 802.3at/802.3af). All ports comply with 10/100/1000BASE-TX.PoE extenders can increase the transmission distance to 100-250 meters via Cat5E/6E UTP cables. This offers great flexibility in extending PoE distance.***When the DC interface input voltage is lower than DC 40V, PoE output on LAN1-LAN4 is disabled. If PoE functionality is required, it is recommended to use a DC 48V-57V power supply.
**Ext mode Note:
1. When Ext mode is enabled, the maximum bandwidth for LAN1-LAN4 network ports is reduced to 10 Mbps per port. Please check your IP camera's bit rate settings. We recommend that the bit rate does not exceed 8 Mbps (8192 Kbps).
2. When Ext mode is enabled, Isolates LAN ports from each other while maintaining uplink access, reducing broadcast storms and improving network stability.

Specification

Support IEEE 802.3af/at/bt power supply
Support DC 5.5x2.1 port input power supply
DC Input Power Pin: positive inside (+), negative outside (-)
Support non-standard PoE 48-57V power supply
Uplink input power supply PoE pins: 1/2(+), 3/6(-), 4/5(+), 7/8(-)
LAN1-LAN4 output power supply PoE pins: 1/2(+), 3/6(-)
PoE total input power: 90 watts
PoE total output power: 72 watts
Maximum power output of a single PoE port: 25 watts
Transmission distance: 100-250m with Cat5e, Cat6, or higher
Ethernet speed: 10/100/1000 Mbps
Network management type: Unmanaged
Environment:

• With 6 KV lightning protection isolation
• International Protection Rating: IP55
• Working temperature: -10 ℃ to 60 ℃ (14℉ to 140℉)
• Storage temperature: -40 ℃ to 85 ℃ (-40℉ to 185℉)
• Working humidity: 10% to 90% non-condensing
• Storage humidity: 5% to 95% non-condensing

Dimensions: 14.5 cm x 8.2 cm x 3.5 cm (5.71 inches x 3.23 inches x 1.38 inches)
Product weight: 160g(approximately 5.64 ounces)

Item Included:

Outdoor Rainproof 5-port GigabitPoE Passthrough Switchx1