 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Compatible DevicesBambu Lab H2D, Bambu Lab H2S, Bambu Lab P1P, Bambu Lab P1S, Bambu Lab P2S, Bambu Lab X1, Bambu Lab X1C, Bambu Lab X1EBambu Lab H2D, Bambu Lab H2S, Bambu Lab P1P, Bambu Lab P1S, Bambu Lab P2S, Bambu Lab X1, Bambu Lab X1C, Bambu Lab X1EConnector TypeThreadedColorWhiteBrandYIBEICOItem Weight19.87 gAbout this item - COMPATIBLE 3D PRINTERS:The PTFE Adapter replacement for Bambu Lab X1C/X1/X1E/P1P/P1S/P2S/H2D/H2S/H2C etc 3D Printer,
- UPGRADED DETACHABLE DESIGN: This 2-in-1 PTFE connector is used to connect PTFE pipes . Compared to other PTFE pipe fittings, this adapter uses a screw-fixed design, allowing for easy removal and cleaning in case of blockages filament or when the fitting needs to be cleaned.
- WHEN USING AMS:Connect the PTFE tube from the tool head to the OUT end of the 2-in-1 PTFE Adapter for Bambu lab.Connect the PTFE tube from the buffer output to one of its IN ends. - Directly insert a maximum of 2 filament wires into each hole of the 2-in-1 PTFE Adapter IN end.make sure that the filament path is smooth, avoiding sharp bends that may over-constrain the PTFE tubes.
- WHEN THE AMS IS NOT BEING USED; Connect the PTFE tube from the tool head to the OUT end of the 2-in-1 PTFE Adapter. Directly insert a maximum of two filament wires into each hole of the 2-in-1 PTFE Adapter IN end.
- EASY PTFE TUBE REMOVAL：We upgraded the disassembly black head of the connector, easily solving the problem of difficult PTFE pipe removal caused by the head being too small.
- CUSTOMER SERVICE: If you have any questions or suggestions after receiving our Product, please contact YIBEICO , We will service for you at first time
 |
|
