These SanDisk SSDs have been pulled from HP thin clients that have since been refurbished. Since they still work, they are being sold as used parts.These drives have been wiped using the ATA Sanitize command. Part of the log generated by Parted Magic's Secure Erase program has been provided as-is below the refund policy.Refund Policy for Used Parts - 30 day return window. If the used part fails within that window, you may return it for a full refund.=== START OF INFORMATION SECTION ===Model Family: SanDisk based SSDsDevice Model: SanDisk SDSA6MM-016G-1006Serial Number: 151924401811LU WWN Device Id: 5 001b44 e6afb6293Firmware Version: U221006User Capacity: 16,013,942,784 bytes [16.0 GB]Sector Size: 512 bytes logical/physicalRotation Rate: Solid State DeviceForm Factor: 1.8 inchesTRIM Command: Available, deterministicDevice is: In smartctl database [for details use: -P show]ATA Version is: ACS-2 T13/2015-D revision 3SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)Local Time is: Tue Aug 4 14:04:42 2026 CDTSMART support is: Available - device has SMART capability.SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSED
General SMART Values:Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled.Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.Total time to complete Offlinedata collection: ( 120) seconds.Offline data collectioncapabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. General Purpose Logging supported.Short self-test routinerecommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 3) minutes.
SMART Attributes Data Structure revision number: 1Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 002 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 002 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 667112 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1106165 Total_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 22051170 Unknown_Attribute 0x0033 100 100 005 Pre-fail Always - 0171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0173 Avg_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 9174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 14184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0194 Temperature_Celsius 0x0022 057 043 000 Old_age Always - 43 (Min/Max 7/59)198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0230 Perc_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 30234 Perc_Write/Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 19241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 142830120242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 419267031
SMART Error Log Version: 1No Errors Logged
SMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Short offline Completed without error 00% 6656 -# 2 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testingSelective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.
