This listing is for the exact SanDisk X400 1TB M.2 SATA SSD shown in the photos.

Drive Information

• Brand: SanDisk
• Series: X400
• Model: SD8SN8U-1T00-1122
• Capacity: 1TB
• Type: Internal SSD
• Form Factor: M.2 2280
• Interface: SATA III 6 Gb/s
• Sequential Read Speed: Up to 545 MB/s
• Sequential Write Speed: Up to 520 MB/s
• Endurance Rating: 320 TBW
• Firmware: X4140000
• Rated Power: 3.3V / 2A

CrystalDiskInfo Results

• Health Status: Good — 95%
• Temperature: 38°C
• Total Host Reads: 22,578 GB
• Total Host Writes: 32,051 GB
• Total NAND Writes: 26,594 GB
• Power-On Count: 921
• Power-On Hours: 54,388
• Unexpected Power Loss Count: 79
• Reassigned Block Count: 1
• Grown Bad Blocks: 1
• Program Fail Count: 0
• Erase Fail Count: 1
• Reported Uncorrectable Errors: 0
• Command Timeout Count: 0
• CRC Error Count: 0
• Available Reserve Space: 100%
• Temperature Throttle Status: 0

Condition

Used and individually tested with CrystalDiskInfo. The drive was recognized properly and reports Good health at 95%, with zero reported uncorrectable errors and 100% available reserve space.

The CrystalDiskInfo screenshot shown in the listing photos is from this exact drive. Please review the photos for the complete health and usage information.

Drive was cleaned using DiskPart and left unallocated for the next owner.

You will receive the exact drive shown in the listing photos. Normal minor cosmetic signs from previous installation may be present.

Please verify that your computer supports M.2 2280 SATA SSDs before purchasing. This is an M.2 SATA drive and is not an NVMe PCIe SSD.