Tripp Lite Hardened Copper to Fiber Media Converter RJ45/SC SMF 10/100Mbps (n784-h01-scsm) Tripp Lite Hardened Copper to Fiber Media Converter RJ45/SC SMF 10/100Mbps (n784-h01-scsm)

International Customers: All electronic products are packaged for sale in the US with US voltage.

Package Contents: N784-H01-SCSM Transceiver/Media Converter L-shaped Bracket Rubber Foot SC Connector Cap External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A) DIN Rail Kit Wall-mounting Hardware Quick Start Guide

TAA Compliant: Yes

Environmentally Friendly: Yes

Environmental Compliance:

Restriction of Hazardous Substances (RoHS)
Waste Electrical and Electronic Equipment Directive (WEEE)

Country of Origin: Taiwan

Product Description

This item is brand-new, factory sealed.

Tripp Lite Network Copper RJ45 Ethernet to Fiber SC Duplex Singlemode Extender Converter, 1310nm Wavelength, Hardened Housing, 10/100 Mbps, Extend 18.6 Miles / 30 Km, 2-Year Warranty (N784-H01-SCSM)

• EXTENDS NETWORK CONNECTION OVER FIBER OPTIC CABLE: Extends a 10/100 Mbps Ethernet network connection over SC duplex singlemode fiber optic cable up to 30 kilometers. Automatic MDI/MDI-X configuration connects devices without crossover cabling.
• MONITOR YOUR INSTALLATION: LEDs indicate Ethernet connection and various statuses, including data transfer speed. Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed.
• BUILT TO WITHSTAND A VARIETY OF HAZARDS: Operating temperature range of -10 to 60C or 14 to 140F. Protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Wall & DIN mounting hardware included.
• COMPLIANT PRODUCTS FOR GOVERNMENT BUSINESSES: Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
• RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.

• Brand: Tripp Lite
• Item model number: N784-H01-SCSM
• Item Weight: 1.32 pounds
• Product Dimensions: 7.2 x 9.17 x 2.44 inches
• Item Dimensions LxWxH: 7.2 x 9.17 x 2.44 inches
• Manufacturer: TRIPP LITE

EXTENDS A NETWORK CONNECTION UP TO 30 KM OVER SC SINGLEMODE FIBER OPTIC CABLE: This network media converter converts a copper Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 30 kilometers (18.6 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCSM with singlemode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. MONITOR YOUR INSTALLATION WITH LINK FAULT SIGNALING AND LOOP BACK FUNCTIONS: Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDS INDICATE INSTALLATION PERFORMANCE AND DIAGNOSTIC FUNCTIONS: Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. PROTECTIVE METAL HOUSING BUILT TO WITHSTAND A VARIETY OF HAZARDS: The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. WORKS IN TANDEM WITH TRIPP LITE'S N785-CH12 CHASSIS: House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-COMPLIANT FOR GSA SCHEDULE PURCHASES: The N784-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Package Contents:

• N784-H01-SCSM Transceiver/Media Converter
• L-shaped Bracket
• Rubber Foot
• SC Connector Cap
• External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A)
• DIN Rail Kit
• Wall-mounting Hardware
• Quick Start Guide

SpecificationPower DescriptionPlug/Connector TypeNEMA 1-15PPower SourceAC AdapterPower Consumption1.80 WPhysical CharacteristicsForm Factor

• Wall Mountable
• DIN Rail (Approximate)8.43 Warranty2 YearInterfaces/PortsNetwork (RJ-45)YesSC Port TypeDuplexTotal Number of Ports2Number of SC Ports1Number of Network (RJ-45) Ports1General InformationBrand NameTripp Lite seriesMarketing Information Features | Extends a Network Connection up to 30 km over SC Singlemode Fiber Optic Cable This network media converter converts a copper Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 30 kilometers (18.6 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCSM with singlemode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back Functions Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. Works in Tandem with Tripp Lite's N785-CH12 Chassis House and power up to 12 Tripp Lite media converters, including the N784-H01-SCSM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-Compliant for GSA Schedule Purchases The N784-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. Product TypeTransceiver/Media ConverterProduct NameN784-H01-SCSM Transceiver/Media ConverterManufacturerEaton CorporationManufacturer Part NumberN784-H01-SCSMProduct ModelN784-H01-SCSMMedia & PerformanceMaximum Distance Supported30 kmMedia Type Supported
  • Twisted Pair
  • Optical Fiber
  Fiber Mode SupportedSingle-modeFiber Optic Cable Wavelength1310 nmTitleProduct TitleEaton Tripp Lite Series Hardened Copper to Fiber Media Converter - 10/100 Mbps, RJ45/SC Singlemode, -10° to 60°C, 30 km [18.6 mi.], TAA (N784H01SCSM)Network & CommunicationEthernet TechnologyFast EthernetNetwork Technology
  Most orders placed prior to 11AM PST ship same business day

  Some lightweight items ship Postal and can be shipped to a PO BOX. Most other orders will ship via UPS or FedEx. Please note we cannot ship UPS or FedEx to PO Box addresses.

  Expedited orders will ship 2nd Day Air

  Returns

  This item is eligible for return within 30 days of delivery. Opened items must be in re-sellable condition including original packaging and all accessories.

  Please visit our Returns Page for more information on Excluded Items, Damage Claims, and more details on requesting RA information.

  [ Read our full policy ]
  About Beach Audio

  Founded in August 2002, Beach Audio´s mission is to provide the best experience on the Internet for buying Consumer Electronics. We focus on making purchasing online a pleasant experience. We offer flat rate Ground shipping on all items less than 75 pounds that can be shipped via common carrier. Our sales office is located in beautiful town of Redondo Beach, California, just a few miles South of Los Angeles International Airport. We do not stock any inventory at our sales office. Instead, we ship from several warehouses located throughout the country. Our sophisticated fulfillment system will automatically ship from the warehouse location that is closest to your shipping address! Why are our prices so low? It´s simple. We have modeled our business much like a wholesaler. We sell in huge volume and have streamlined our operations to provide you with the best combination of price and service available anywhere.

  Hours of Operation 8AM - 5PM PST MON - THU, 8AM - NOON PST FRIDAY

  [ Read more ] Copyright© Beach Audio Inc, 2022